The contents of this page are subject to change without notice as the vendor's pricing and client requests may change
Date of Updates: July 11, 2024 to August 26, 2024
Date Removed Offline: August 26, 2024
This page (entire content) has been entered into a Contract To Build Agreement
30 days ++ of viewing, this page has expired. Deleted by auto-removal.
The total number of days posted online for customer review is 46
Addition for C-Store
©Inco Steel Buildings, Inc.
Prepared For: Mr. Swikar Patel. 1159 E Caswell St, Wadesboro, NC-28170
Anson County North Carolina. Building Inspections (Permit Fee: $480.00)
IMPORTANT NOTICE: The Inco addition is a certified engineered addition. The Inco addition is NOT a light gauge thin wall internet tube type tin building advertised/sold on the internet.
-
Option-1 $99,000 to $127,000
Steel Frame. Steel Siding and Steel Roofing. (Price based upon existing conditions of building and site)Expire Date: July 12, 2024
-
Option-2 $134,340
Wood/Steel Frame. Steel Siding and Steel Roofing. (Price based upon existing conditions of building and site.Expire Date: July 12, 2024
-
OPtion-3 $142,300
Painted Block Walls and Steel Roofing. (Price based upon existing conditions of building and site.Expire Date: July 12, 2024
-
Option-4 (July 19,2024) $151, 043
Brick Veneer, Wood/Steel Frame. and Steel Roofing. (Price based upon existing conditions of building and site. Expires 7-2-2024
ADDITION OPTIONS
3-Material Options
Steel. Wood/Steel. CMU/Wood
Option-1, Steel Frame addition will use steel framing, steel roofing, and steel wall sheeting with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
Option-2 Wood/Steel Frame addition will use wood and steel framing, steel roofing, and steel wall sheeting with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
Option-3. CMU Masonry/Wood Frame addition will use CMU masonry with wood framing, steel roofing, and painted Concrete Masonry Units with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
PROPOSED WORK SUMMARY
Building Addition: 60FT x 20FT
This is a turnkey package proposal
This is a turnkey package proposal with Inco Steel Buildings, Inc as the lead general contractor for the entire project. The proposed addition will be approximately (average size) 60 feet in length and 20 feet in depth, designed by Inco Steel Buildings, Inc and sealed by a licensed structural engineer working for the steel building manufacturer (or) retained by Inco Steel Buildings, Inc. There will be a monolithic slab foundation, a finished exterior and an unfinished interior, along with one steel door unit on the exterior. The proposed addition will abut the existing rear wall elevation and will be affixed and sealed into the existing roof system, and wall system.
DOORS, WINDOWS: The addition will have one (1) exterior wall-mounted, commercial-grade solid steel, 6070 double door outswing unit with lever lockset, deadbolt, and push bar Exit Device with Alarm. Window units, and/or Storefront Glazing by Inco are not included in this quote, but are available at an additional price. Inco, and its Engineer must approve all window units to used. It is Inco’s responsibility to purchase and install all window units and/or storefront metal framing and glazing.
THE INTERIOR
Interior build-out and fit-out is by the Property Owner
1159 E CASWELL ST, WADESBORO, NC-28170
NOTE: The owner stated that he or his staff would handle interior work. The owner is responsible for breaking through the brick wall after the addition has been closed in and secured.
THE WORK DESCRIPTION
Turnkey Addition on Rear of C-Store
1159 E CASWELL ST, WADESBORO, NC-28170
Inco will plan and design and construct a commercial addition/extension to the rear elevation of the existing building located at: 1159 E CASWELL ST, WADESBORO, NC-28170, using a pre-engineered steel building provided by Inco Steel Buildings, Inc., that is structural-grade rated, and designed by a licensed engineer.
THE ADDITION DIMENSIONS
The Size of The Proposed Addition
1159 E CASWELL ST, WADESBORO, NC-28170
For the addition/extension size, the customer provided 20′ x 60-foot dimensions in an email dated June 14-17, 2024. The proposed addition by Inco Steel Buildings, Inc shall be approximately twenty-feet deep in projection (parallel with both Holly Street and US-74/East Caswell Street) and sixty-feet in length (perpendicular with both Holly Street and US-74/East Caswell Street) It is assumed that the existing building eaves are approximately twelve feet high at the roof-eave top connection point.
THE JOB ASSUMPTIONS
Inco Must Verify Jobsite Conditions
1159 E CASWELL ST, WADESBORO, NC-28170
This is a sight-unseen jobsite. This quote is based on information, and assumptions that has not yet been verified at the jobsite address. After Inco has visited the jobsite, if conditions differ from those described herein and assumed by Inco Steel Buildings Inc, this proposal must be reevaluated and the contract price adjusted accordingly. Any change in the price, or the work description must be in writing and approved by all parties via a change order issued by Inco Steel Buildings, Inc. and signed by all parties, with Change Order fee payment made at the signing of each change order agreement.
SOIL BEARING CAPACITY
Inco Must Verify Jobsite Conditions
1159 E CASWELL ST, WADESBORO, NC-28170
As soil bearing tests and analyses have not been conducted at the project location, it is assumed by Inco that the ground at the jobsite address is suitable for bearing loads as prescribed by NC state building codes, and required by structural engineers retained/working on behalf of Inco Steel Buildings, Inc.
LICENSING CREDENTIALS
Licensed Building Contractor (North Carolina)
North Carolina Licensing Board for General Contractors
Inco Steel Buildings, Inc is a professional licensed building contractor that is licensed by: North Carolina Licensing Board for General Contractors. Phone: (919) 571-4183. Address: 5400 Creedmoor Rd, Raleigh, NC 27612
RETAINER AGREEMENT
Step #1. Customer Must Retain Inco Steel Buildings, Inc
A retainer fee is paid by the customer
The Owner upon acceptance of this preliminary quote shall retain Inco Steel Buildings, Inc before the Contract Agreement is written. The retainer agreement and the retainer fee of ($10,000) (Ten-Thousand-Dollars-no-cents) are to reserve Inco’s production schedule and reserve a date established as the construction commencement date. The retainer agreement must be signed and the fee paid to move forward, order steel building package, and start the process.
CONTRACT TO BUILD AGREEMENT
Step #2. Sign Contract To Build Agreement
The Owner upon acceptance of this preliminary quote
When Inco is retained by the Owner, Inco will prepare a separate detailed Contract To Build Agreement that must be signed before construction begins.
In the agreement, 60% of the sale price shall be specified as the Contract Deposit Amount. In the case of pre-paid retainers, the deposit must include them unless stated otherwise in-writing.
The contract shall contain a description of the work to be performed, specifications for the work, the contract terms and conditions, a list of the owner’s and builder’s responsibilities, payment schedule, and warranty. The contract shall be accompanied by architectural drawings, as well as any other addendums.
Before work can begin onsite, the Builder and Owner must sign the Contract To Build Agreement, and the contract deposit fee must be paid in full to the Inco on the date of signing the doucments.
WORK ORDER PLACEMENT
Inco will measure the existing building
Dimensions of the addition and architectural drawings
Prior to placing the steel (BUILDING PACKAGE) order, Inco will measure the existing building on the jobsite to determine the exact dimensions of the addition and architectural drawings required for the building permit and the construction work to be performed.
THIS PROPOSAL ENCOMPASSES
Inclusions and Exclusions
Dimensions of the addition and architectural drawings
This proposal has inclusions and exclusions, work descriptions, info for building permit(s), as well as terms and conditions associated with the job site address.
INCLUSIONS: As required by law, Inco will provide all commercial insurances, automobile insurances, and workers compensation insurances. Inco will provide all admin, accounting, jobsite stationed management, building materials, construction equipment, and professional labor to complete the work description as described herein.
STAGING AREA: As part of the construction process, the customer agrees to provide adequate parking/staging area for a portable toilet, material staging, and equipment parking until the final building inspection has been approved by the Anson County NC building inspections department and the last payment has been received and cleared by Inco Steel Buildings, Inc.
BUILDING CODES: All work performed shall be in full compliance with applicable Anson County NC building codes and ordinances, and NC State Building codes. All construction work shall pass mandatory inspections required by the presiding code enforcement official(s) for Wadesboro, (or) Anson County North Carolina Building Inspections Department.
BUILDING PERMITS: Building permits are not included in this cost estimate quote. The property Owner is responsible for all building permits unless agreed to in-writing. As an option, Inco will purchase permits when all working drawings sealed by an architect and engineer have been submitted to Inco by the property Owner. If working drawings are not required by the municipality, Inco will purchase permits and the customer agrees to reimburse Inco in-full for all related expenses and fees. The reimbursement includes all administrative costs related to filing the application, and procuring the permit. Inco will be reimbursed for any permit purchases.
EXCLUSIONS: Inco does not include, provide, or pay for the following exclusions. Inco Steel Buildings can provide most exclusions listed for an additional fee paid by the Owner via an Inco written Change Order Agreement.
***Owner stated he/staff will perform interior work***
Exclusions:
- Building Permit(s) [$480.00 Quote by Anson County]
- Other Mandated Permits or Approvals by any entity.
- Interior Build-out and Fit-out***
- New Addition Brick Wall Break-Through/Opening *** NOTICE: Wall opening happens after the addition is secured and closed-in
- Brick Veneer Wall (New Installation Brick)
- Brick Veneer Wall (Existing Removal of Brick)***
- Relocation/Modification/Removal/Reinstallation
- of Public Utilities
- Electric Service Entrance, or Meter
- Electric Service Entrance Mast/Riser
- HVAC Ducting Cover
- HVAC Condensing Unit Compressor
- Plumbing Components
- Thermal Insulation
- Underground Utilities
- Above Ground Utilities
- Underground Drainage System
ADDITION OPTIONS
3-Material Options
Steel. Wood/Steel. CMU/Wood
Option-1, Steel Frame addition will use steel framing, steel roofing, and steel wall sheeting with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
Option-2 Wood/Steel Frame addition will use wood and steel framing, steel roofing, and steel wall sheeting with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
Option-3. CMU Masonry/Wood Frame addition will use CMU masonry with wood framing, steel roofing, and painted Concrete Masonry Units with a monolithic concrete footing and slab foundation. Brick masonry work is not included. The proposed concrete slab will sit level at the top of the existing concrete slab.
PROPOSED WORK SUMMARY
Building Addition: 60FT x 20FT
This is a turnkey package proposal
This is a turnkey package proposal with Inco Steel Buildings, Inc as the lead general contractor for the entire project. The proposed addition will be approximately (average size) 60 feet in length and 20 feet in depth, designed by Inco Steel Buildings, Inc and sealed by a licensed structural engineer working for the steel building manufacturer (or) retained by Inco Steel Buildings, Inc. There will be a monolithic slab foundation, a finished exterior and an unfinished interior, along with one steel door unit on the exterior. The proposed addition will abut the existing rear wall elevation and will be affixed and sealed into the existing roof system, and wall system.
DOORS, WINDOWS: The addition will have one (1) exterior wall-mounted, commercial-grade solid steel, 6070 double door outswing unit with lever lockset, deadbolt, and push bar Exit Device with Alarm. Window units, and/or Storefront Glazing by Inco are not included in this quote, but are available at an additional price. Inco, and its Engineer must approve all window units to used. It is Inco’s responsibility to purchase and install all window units and/or storefront metal framing and glazing.
THIS PROPOSAL ENCOMPASSES
Inclusions and Exclusions
Dimensions of the addition and architectural drawings
This proposal has inclusions and exclusions, work descriptions, info for building permit(s), as well as terms and conditions associated with the job site address.
INCLUSIONS: As required by law, Inco will provide all commercial insurances, automobile insurances, and workers compensation insurances. Inco will provide all admin, accounting, jobsite stationed management, building materials, construction equipment, and professional labor to complete the work description as described herein.
STAGING AREA: As part of the construction process, the customer agrees to provide adequate parking/staging area for a portable toilet, material staging, and equipment parking until the final building inspection has been approved by the Anson County NC building inspections department and the last payment has been received and cleared by Inco Steel Buildings, Inc.
BUILDING CODES: All work performed shall be in full compliance with applicable Anson County NC building codes and ordinances, and NC State Building codes. All construction work shall pass mandatory inspections required by the presiding code enforcement official(s) for Wadesboro, (or) Anson County North Carolina Building Inspections Department.
BUILDING PERMITS: Building permits are not included in this cost estimate quote. The property Owner is responsible for all building permits unless agreed to in-writing. As an option, Inco will purchase permits when all working drawings sealed by an architect and engineer have been submitted to Inco by the property Owner. If working drawings are not required by the municipality, Inco will purchase permits and the customer agrees to reimburse Inco in-full for all related expenses and fees. The reimbursement includes all administrative costs related to filing the application, and procuring the permit. Inco will be reimbursed for any permit purchases.
EXCLUSIONS: Inco does not include, provide, or pay for the following exclusions. Inco Steel Buildings can provide most exclusions listed for an additional fee paid by the Owner via an Inco written Change Order Agreement.
***Owner stated he/staff will perform interior work***
Exclusions:
- Building Permit(s) [$480.00 Quote by Anson County]
- Other Mandated Permits or Approvals by any entity.
- Interior Build-out and Fit-out***
- New Addition Brick Wall Break-Through/Opening *** NOTICE: Wall opening happens after the addition is secured and closed-in
- Brick Veneer Wall (New Installation Brick)
- Brick Veneer Wall (Existing Removal of Brick)***
- Relocation/Modification/Removal/Reinstallation
- of Public Utilities
- Electric Service Entrance, or Meter
- Electric Service Entrance Mast/Riser
- HVAC Ducting Cover
- HVAC Condensing Unit Compressor
- Plumbing Components
- Thermal Insulation
- Underground Utilities
- Above Ground Utilities
- Underground Drainage System
Establishing Inco Account
Tuesday, July 9, 2024
We appreciate your interest in Inco Steel Buildings, Raleigh, NC. We have provided you with (3) pricing quote estimates, free-of-charge within 48-hours of contacting our office.
How We Work:
Upon approval, Inco Steel Buildings, Inc extends credit.
It is necessary for Inco Steel Buildings to have information that identifies creditworthiness, repayment capacity, and ability to repay credit promptly in a timely manner before we will do business with you.
Inco Steel Buildings requires all the following information.
- An official letter from the applicant’s commercial bank regarding financial capability
Applicants’ personal credit report
Applicants’ corporate business’ credit report
A minimum of five commercial references are required (five years’ worth of transactions for each)
The attached business application must be completed and emailed back to the INCO office.
>> PROCESS - FLOWCHART <<